Also, if you *KNOW* that those phones are not using 15.4watts you can setup the power consumption on each port:
int range gi0/1 - 48 power inline consumption 7700 -- Tim On Sat, Dec 12, 2009 at 2:13 PM, Buhrmaster, Gary <[email protected]> wrote: >> As i seen in sh power inline o/p few alcatel IP phones are class 0 >> while others class 2. Is this creating the problem ? > > Note that all of your class '0' (unrecognized?) devices are > being allocated 15.4 watts. That reduces the number of > other devices you can use. When your failures occur, look > at the total power allocated and I suspect you will find > you are simply out of allocatable power. The power supply > of that switch is not capable of providing a full 15.4 watts > to every port at the same time. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
