After a long day, I'm certain that I'm missing something simple. I'm trying to get a loopback address advertised into OSPF, after a direct ptp setup has already been established ( I can ping6 from ptp interface to ptp interface ).
I'm working from a C2961, and in this case, its peer is Quagga. I have done this setup many times before between both Cisco->Quagga and Cisco->Cisco: O>* 2607:f118:1::e1/128 [110/1] via fe80::216:9dff:fe92:1700, em3.300, 3d06h48m O>* 2607:f118:1::e2/128 [110/1] via fe80::209:e8ff:fe43:9f00, em6, 03:26:06 O>* 2607:f118:1::e3/128 [110/2] via fe80::21a:70ff:fe14:568a, em5, 04w2d06h [...snip...] O>* 2607:f118:1::ff0/128 [110/1] via fe80::20a:f4ff:fe0b:b109, em2.98, 03:17:14 The above are loopbacks within the IGP. I'm having a problem getting ::ff1/128 included. I've been comparing rtr configs, but am still missing something due to being over-tired. Can someone clue-bat me with a fresh approach on how to look at this? Steve ps. usually things just 'click' after I send out a public message, so here's to trying ;) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
