On 2009-12-24 17:51, Joe Maimon wrote: >> The original CF card may have gone bad but if you're sure the other CF >> cards are OK then they may be formatted wrong. > The card is fine, tested in external reader. They are all fine.
The CF slot of NPE-G1 is very picky about CF - even if it's from Cisco. I'd make sure I have latest ROMMON loaded and then do following: - make the NPE-G1 boot the IOS correctly by any means - loading it until it goes up - format the CF then - new ROMMONs tend to mask various 'problems' the reader may have with the CF - then check if You can reboot the router safely and it will read the CF correctly If You can't make it work - RMA the NPE. Maybe the CF reader is simply broken. -- "Everything will be okay in the end. | Łukasz Bromirski If it's not okay, it's not the end. | http://lukasz.bromirski.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
