On 12/24/09 1:24 PM, Łukasz Bromirski wrote:
The CF slot of NPE-G1 is very picky about CF - even if it's from
Cisco. I'd make sure I have latest ROMMON loaded and then do following:
- make the NPE-G1 boot the IOS correctly by any means - loading
it until it goes up
- format the CF then - new ROMMONs tend to mask various 'problems'
the reader may have with the CF
- then check if You can reboot the router safely and it will read
the CF correctly
If You can't make it work - RMA the NPE. Maybe the CF reader is simply
broken.
Another thought: If you've played with these cards a lot; had them in a
card reader, etc. I might suggest getting rid of any cruft in the first
few blocks:
dd if=/dev/zero of=/dev/yourrawcarddevice bs=1024 count=256
On any sort of Unix box will do the trick. (the values above aren't
critical, just good enough to get rid of any garbage)
-Ryan Brooks
[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
