hi all
i have Cisco 3750 connected to 6523 switch
on the 3750:
interface GigabitEthernet1/1/2
no switchport
ip address 10.20.3.18 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip ospf network point-to-point
speed nonegotiate
end
sh int g1/1/2 | inc MTU
MTU 1512 bytes, BW 1000000 Kbit, DLY 10 usec,
on the 6523:
interface GigabitEthernet1/27
ip address 10.20.3.17 255.255.255.252
ip ospf network point-to-point
load-interval 30
speed nonegotiate
no mop enabled
end
sh int g1/27 | inc MTU
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
The problem is that the OSPF is running and functioning well , how does the
OSPF neighbor relation is up and there is an MTU mismatch ?
_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on
Facebook.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
