After reload, 3550 does not load share Symptom: A 3550 was reloaded. After it came back online, it was no longer load-sharing correctly out of its two uplinks (g0/1 + g0/2). All of the traffic was only going out one uplink.
Workaround: Performed "shut" and "no shut" on the interface. Load sharing would come back on these two links. Status Fixed (Verified) Severity 3 - moderate Product Cisco IOS software Technology 1st Found-In 12.2(35)SE Known Affected Versions Fixed-In 12.2(50)SE 12.2(50)SE1 Component(s) ospf -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Hector Herrera Sent: Wednesday, January 06, 2010 2:55 PM To: [email protected] Subject: [c-nsp] Bug ID CSCsv50653 I don't have access to the bug toolkit. Could someone please send the details on this bug: CSCsv50653 I want to know if it is affecting my load-balancing setup. Thank you -- Hector _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ *** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. *** _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
