Andrey, Is there a break down or analysis on why you are choosing 1546? I assume the following;
1500 bytes max data + 22 max header + 4 CRC trailer + 4 byte 802.1q tag +16 up to 4 labels = 1546? Why not just enable jumbos and set it as high as possible? mike On Tue, Jan 12, 2010 at 6:55 AM, Andrey 'sshd' Petrenko < [email protected]> wrote: > Sorry, in mpls interfaces use mtu 1546 > > 2010/1/11 Mohammad Khalil <[email protected]> > > > > > hi all > > we have wimax network , our network are all cisco Cisco 7606 , Cisco 6524 > > ME , Cisco 3750 ME > > and we enabled MPLS in our network in order to provide MPLS service to > our > > customers (VPLS , L3VPN , EoMPLS) > > what is the best MTU value that i can enable on my network either on > > interface basis or on system basis > > > > Thanks in advance > > > > _________________________________________________________________ > > Windows Live: Keep your friends up to date with what you do online. > > > > > http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010 > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > -- > With best regards, > Andrey 'sshd' Petrenko > xmmp: sshd at jabber.org > gtalk: andy.petrenko at gmail.com > skype: andy.petrenko > web: http://sshd.by > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
