The MTU on PA-FE (probably) does not include MAC header and definitely does not 
include CRC trailer. Otherwise the minimum value of 1500 wouldn't make sense.

> -----Original Message-----
> From: Tony [mailto:[email protected]]
> Sent: Wednesday, January 13, 2010 8:10 AM
> To: [email protected]; DonnLasher
> Subject: Re: [c-nsp] Ethernet Network
> 
> 
> 
> --- On Wed, 13/1/10, Lasher, Donn <[email protected]> wrote:
> 
> >
> > >> SNIP >>
> > >1500 bytes max data + 22 max header + 4 CRC trailer + 4
> > byte 802.1q tag
> > >+16 up to 4 labels = 1546?
> > >
> > >Why not just enable jumbos and set it as high as
> > possible?
> >
> >
> > 1546 = largest MTU the 355x/356x switches, PA-FE, etc, will
> > support, as
> > I recall.
> >
> 
> PA-FE are limited to 1530. You're correct about 1546 for the switches
> though.
> 
> 7204(config)#int fa4/0
> 7204(config-if)#mtu ?
>   <1500-1530>  MTU size in bytes
> 
> 
> 
> 
> __________________________________________________________________________
> ________
> See what's on at the movies in your area. Find out now:
> http://au.movies.yahoo.com/session-times/
> 


_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to