On Fri, Jan 29, 2010 at 10:42:27AM +0300, Mikisa Richard wrote: > Hi all, > > Any ideas why the Policer policy below does not work. Intention is for > me to lock down traffic to 3Mbps both ways on interface g3/11. > > !! > class-map match-all ROKE-LIMIT > match access-group name ROKE-SLAP > ! > policy-map POLICY-ROKE > class ROKE-LIMIT > police 3000000 bps 30000 byte conform-action transmit exceed-action drop > ! > interface GigabitEthernet3/11 > description link to ROKE > no switchport > ip address x.x.x.x > service-policy input POLICY-ROKE > service-policy output POLICY-ROKE
Looks like the correct thing, assuming the access-group traffic is being matched. Do you have 'qos' enabled? Its off by default on the 4500. Just a simple 'qos' as a config option in this platform. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
