Hi all,
Any ideas why the Policer policy below does not work. Intention is for
me to lock down traffic to 3Mbps both ways on interface g3/11.
!!
class-map match-all ROKE-LIMIT
match access-group name ROKE-SLAP
!
policy-map POLICY-ROKE
class ROKE-LIMIT
police 3000000 bps 30000 byte conform-action transmit exceed-action drop
!
interface GigabitEthernet3/11
description link to ROKE
no switchport
ip address x.x.x.x
service-policy input POLICY-ROKE
service-policy output POLICY-ROKE
Regards
Richard
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
