On Tue, Feb 9, 2010 at 4:03 PM, Church, Charles <[email protected]> wrote: > The weird part is the NDE process is still using CPU. Which netflow setting > are you using for 'mls flow ip xxx'? Since both the RP and SP CPU are > getting crushed at times, seems like more than just a punted packet issue, > since that would be primarily RP, wouldn't it?
Netflow is basically configured like this: ip flow-cache entries 524288 ip flow-cache timeout active 1 mls ip slb purge global mls ip multicast flow-stat-timer 9 mls aging fast time 4 threshold 2 mls aging long 128 mls aging normal 64 mls netflow usage notify 80 300 mls flow ip interface-full mls flow ipv6 interface-full mls rate-limit unicast cef glean 200 50 mls rate-limit all ttl-failure 100 10 no mls acl tcam share-global mls cef error action freeze ip flow-export source Loopback0 ip flow-export version 5 origin-as ip flow-aggregation cache as cache timeout active 1 export destination <ip> 9000 enabled _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
