On Wed, Feb 10, 2010 at 8:13 PM, David Freedman <[email protected]> wrote: > - - Hold queue input appropriate (for punt to MSFC), usually set to 4096 > for these I moved from 75 to 2000 yesterday and then tried 4096. The results were more or less the same.
> - - No IGP hello padding (if you have large MTU and pad then you must punt > these big things MTU is 1500 on all my interfaces throughout the entire backbone. > - - Check SPD headroom (show ip spd) #show ip spd Current mode: normal. Queue min/max thresholds: 73/74, Headroom: 100, Extended Headroom: 10 IP normal queue: 1, priority queue: 0. SPD special drop mode: none > - - The drops are not being reported on input due to lack of transmit > buffer on output (i.e to lower speed card), check traffic flows/pps to > low speed interfaces and adjust buffers appropriately Can you explain this further? Andy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
