On Mar 8, 2010, at 8:48 AM, bharath kondi wrote:

HI Everyone,

Good day to you.

I have some issues with our GSR 12012 router, kindly check the below log. This log is taken just before i lost connection to my router. Can anyone
tell me what is wrong with our router.


Ok, a few suggestions:

Do you have any spare SFC's or CSC's? If so, swap out an SFC, or put in the secondary CSC if you have one.

Try forcing a changeover to the standby RP and see if that changes anything. Could even be a problem with the standby.

Reseat all cards (including the CSC and SFCs) and see if that changes anything.

What version of IOS?

Here's similar output from our 12012 (which has a bad FastEthernet that I know about, that is throwing an SRAM parity error; I just haven't replaced it yet):

pari-gsr-12>sh fab
Dest    ToFab       FrFab     Bad         Unexpected  Lost
Slot    Pkts        Pkts      Seq         Pkts        Pkts
----------------------------------------------------------
Slot0   5069693     5069693   0           0           0
Slot2   5069686     5069686   0           0           0
Slot3   5025542     5025542   0           0           0
Slot4   5069672     5069665   0           0           7
Slot6   5069686     5069686   0           0           0
Slot7   5069682     5069682   0           0           0
Slot9   5069684     5069684   0           0           0
Slot10  5069154     4990284   0           0           78870
Slot11  5041831     5041831   0           0           0

                        Round-trip delay profile (mS)
00 100 200 300 500 1000 2000 5000 10000 99 ms 199 ms 299 ms 499 ms 999 ms 1999 ms 4999 9999 and up --------------------------------------------------------------------------- 0 5067846 286 878 683 0 0 0 0 0 2 5068346 612 523 204 1 0 0 0 0 3 5024186 611 534 210 1 0 0 0 0 4 5068400 641 453 170 1 0 0 0 0 6 5068468 658 410 149 1 0 0 0 0 7 5068524 667 365 125 1 0 0 0 0 9 5068502 675 377 129 1 0 0 0 0 10 4990128 105 24 18 3 6 0 0 0 11 5033998 3921 3215 695 2 0 0 0 0

Max RTT profile (mS)
            Round-trip
Slot        Maximum
----        -------
0           488           16:06:36 UTC Dec 20 2009
2           520           08:12:54 UTC Jan 26 2010
3           520           08:12:54 UTC Jan 26 2010
4           520           08:12:54 UTC Jan 26 2010
6           520           08:12:54 UTC Jan 26 2010
7           520           08:12:54 UTC Jan 26 2010
9           520           08:12:54 UTC Jan 26 2010
10          1172          23:37:23 UTC Dec 4 2009
11          552           13:24:12 UTC Jan 30 2010

Last clearing of "show fabric" counters never
multicast timeout 0
failed pak        0
Current fabric timeout is 6000

fabric send fails 0
pari-gsr-12>sh gsr
Slot 0  type  = Route Processor
        state = ACTV RP   IOS Running  ACTIVE
Slot 2  type  = 4 Port Packet Over SONET OC-3c/STM-1
        state = IOS RUN   Line Card Enabled
Slot 3  type  = 4 Port Packet Over SONET OC-3c/STM-1
        state = IOS RUN   Line Card Enabled
Slot 4  type  = 1 Port Gigabit Ethernet
        state = IOS RUN   Line Card Enabled
Slot 6  type  = 4 Port Packet Over SONET OC-3c/STM-1
        state = IOS RUN   Line Card Enabled
Slot 7  type  = 4 port ATM Over SONET OC12c/STM-4c
        state = IOS RUN   Line Card Enabled
Slot 9  type  = 1 Port Gigabit Ethernet
        state = IOS RUN   Line Card Enabled
Slot 10 type  = 8 Port Fast Ethernet
        state = IOS RUN   Line Card Enabled
Slot 11 type  = Route Processor
        state = STBY RP   IOS Running  STANDBY
Slot 16 type  = Clock Scheduler Card
        state = Card Powered
Slot 17 type  = Clock Scheduler Card
        state = Card Powered  PRIMARY CLOCK
Slot 18 type  = Switch Fabric Card
        state = Card Powered
Slot 19 type  = Switch Fabric Card
        state = Card Powered
Slot 20 type  = Switch Fabric Card
        state = Card Powered
Slot 24 type  = AC Power Supply
        state = Card Powered
Slot 25 type  = AC Power Supply
        state = Card Powered
Slot 26 type  = AC Power Supply
        state = Card Powered
Slot 27 type  = AC Power Supply
        state = Card Powered
Slot 28 type  = Blower Module(12)
        state = Card Powered
Slot 29 type  = Blower Module(12)
        state = Card Powered
pari-gsr-12>sh log
[snip]
SLOT 10:Mar 8 21:01:03.091 UTC: %LCFE-3-SOP: RX:BadFramerSlice. Source=0x40 (FramerIO), halt_minor0=0x4 SLOT 10:Mar 8 21:01:03.091 UTC: %LC-4-ERRRECOVER: Invoking HIGH SEVERITY Error Recovery. SLOT 10:Mar 8 21:01:03.091 UTC: %LCFE-3-RX_TRANS_INTR: RX FPGA has detected SRAM Parity Error Mar 8 21:01:06.267 UTC: %LINK-3-UPDOWN: Interface FastEthernet10/2, changed state to down Mar 8 21:01:08.267 UTC: %LINK-3-UPDOWN: Interface FastEthernet10/2, changed state to up SLOT 10:Mar 8 21:01:20.799 UTC: %LCFE-3-RX_TRANS_INTR: RX FPGA has detected SRAM Parity Error SLOT 10:Mar 8 21:01:21.975 UTC: %LC-4-ERRRECOVER: Finished Error Recovery.

Mar 8 21:01:23.979 UTC: %LINK-3-UPDOWN: Interface FastEthernet10/2, changed state to down Mar 8 21:01:25.979 UTC: %LINK-3-UPDOWN: Interface FastEthernet10/2, changed state to up
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to