Dear Lowen, Thanks for your reply.
The version of our GSR is: Cisco Internetwork Operating System Software IOS (tm) GS Software (GSR-P-M), Version 12.0(32)SY7, RELEASE SOFTWARE (fc1) I dont have any spare SFC's, i will check on forcing the changeover if i get the prob again. Thanks and Regards Bharath ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ok, a few suggestions: Do you have any spare SFC's or CSC's? If so, swap out an SFC, or put in the secondary CSC if you have one. Try forcing a changeover to the standby RP and see if that changes anything. Could even be a problem with the standby. Reseat all cards (including the CSC and SFCs) and see if that changes anything. What version of IOS? Here's similar output from our 12012 (which has a bad FastEthernet that I know about, that is throwing an SRAM parity error; I just haven't replaced it yet): _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
