Eric, Thanks for the info. Would you be willing to share a link to the documentation? Iv been looking for something that spelled out the tech specs of the switch.
Jimmy Changa via Droid On Mar 23, 2010 5:27 PM, "Eric Kujawski" <[email protected]> wrote: Jimmy, Per the Cisco document I'm looking at, the bottom (8) 10G ports are line rate (80G). The top expansion slots are 40G each (2:1 oversubscription if you buy the 8 port cards). As for your issue, we've not seen any problems like this on our 4900Ms (quite a number in production doing over 10G on the bottom ports in a 2x10G or 4x10G port-channel setup). Best of luck getting that tracked down. -Eric -----Original Message----- From: [email protected] [mailto:[email protected]... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
