HI all. Can anyone help find solution how filter L2 traffic(in q-in-q vlan) on 7600.
I'm try to use VACL, but don't work. Then i'm apply filter all traffic stop. If i'm use "mac access-group PPPoE in" on GigabitEthernet9/3 - all traffic stops. -- mac access-list extended PPPoE permit any any 0x8863 0x0 permit any any 0x8864 0x0 vlan access-map PPPoE_Only 10 match mac address PPPoE action forward vlan filter PPPoE_Only vlan-list 6 -- - l2 vfi vl6 manual vpn id 6 neighbor 2.3.0.1 60 encapsulation mpls neighbor 2.3.0.2 61 encapsulation mpls interface Vlan6 no ip address xconnect vfi vl6 interface GigabitEthernet9/3 switchport switchport access vlan 6 switchport mode dot1q-tunnel spanning-tree bpdufilter enable - _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
