Hi guys, My office 2 is DR site of DR1..............All my traffic goes out to MPLS remote sites via office 1 , and it goes out via office 2 only when office is down ...
Below is my office 2 network ....Network of office 1 and office 2 are replica of each other. OFFICE 2 MPLS router 1 MPLS router 2 L2 Switch Distruition switch 1---------------Distribution Switch 2 | | | | EIGRP DOMAIN || | OFFICE 1--------------------MPLS Cloud EBGP between - 1) DS1 and MPLS router 1 2) DS1 and MPLS router 2 3) DS2 and MPLS router 1 4) DS2 and MPLS router 2 IBGP 1) DS1 and DS2 At both DS I'm redistributing BGP to EIGRP ..... 1) My office 2 is learning MPLS routes as preffered routes from EIGRP domain Office 1 2) office 2 is DR site , so all traffic should go via office 1 3) when traffic of users in office 2 reach distribution switch 1 or 2 , they find EBGP route AD 20 and route via EIGRP 170 ... so they go out via office 2 .Which is against requirement as its DR site only. 4) so how to route traffic to MPLS via office 1 of users sitting in office 2 ...??? 5) and how to route traffic to MPLS via office 2 when OFFICE1 is down ...??? Regards _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
