Elmar, Please check this link: http://www.cisco.com/en/US/docs/ios/ios_xe/lanswitch/configuration/guide /lsw_cfg_flwload_xe_ps9587_TSD_Products_Configuration_Guide_Chapter.html
You should be looking at the "Flow Based" option... Per the command reference (http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_l1.h tml#wp1022040) This is available since IOS XE 2.5 Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Elmar K. Bins Sent: Tuesday, April 06, 2010 17:13 To: Pavel Dimow Cc: [email protected] Subject: Re: [c-nsp] portchannel load balancing between L3 switch and router Re Pavel, [email protected] (Pavel Dimow) wrote: > port-channel load-balancing vlan-manual > > and I understand that I can't have one vlan loadbalanced across two > portchannel members but > only the one at the time and second member is standby. > > Am I right or there is another solution? I have tried the same thing (trunk-channeling), and it just does not work on ASRs (yet?). So yes, you are right, there seems to be no other solution right now. Maybe someone from Cisco can tell us whether this issue will be remedied. Yours, Elmar. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
