To erase the existing configuration run the "write erase" command then, "reload".
> > Message: 6 > Date: Thu, 08 Apr 2010 14:46:26 -0400 > From: "David White, Jr. (dwhitejr)" <[email protected]> > To: "Fancher, William" <[email protected]> > Cc: [email protected] > Subject: Re: [c-nsp] Old Pix > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > copy & paste puts data into the running-configuration, and that is a > 'merge'. > If you start with a blank config on the PIX (from clear config all), > then pasting in your old config should yield your old conf (other than > the fact that interfaces will be shutdown). > > The other option is to take the config file and TFTP it to the > startup-config. That will perform a 'replace' of the config. Then > reboot the box. > > Sincerely, > > David. > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
