I've looked into the communities option, but only Qwest supports them,
my other provider doesn't support communities at this time. Though the
Qwest link is the one i want to push more traffic to, so maybe i can
just use their communities and see what happens.
On 4/14/2010 7:56 PM, Michael K. Smith wrote:
On 4/14/10 2:48 PM, "Chris Gotstein"<[email protected]> wrote:
It's inbound i'm mostly concerned with. I'm taking full routes from
both providers. Paths to both a relatively equal, so the path with the
lowest ID is winning, causing it to be overloaded.
---- ---- ---- ----
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | [email protected]
Ugh. There aren't very many subtle ways to do inbound shaping. The hammer
approach is as-path prepend, and you could do it more granularly via
route-maps. As an example, match access-list 100 prepend once, match
access-list 200, prepend twice, etc.
Another way to approach it is to ask your upstream providers if they have
communities you can match to set their local preference on your behalf.
If you're email is your AS, then it looks like you have Qwest and a more
local provider.
Qwest communities can be found at http://onesc.net/communities/as209/. I
don't see a listing for AS46208 so you may have to ask them.
Regards,
Mike
--
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
