At 16:23 14/04/2010 -0500, MrPaul wrote:
By default, BGP chooses one best path among the possible equal-cost paths
that are learned from one AS. However, you can change the maximum number of
parallel equal-cost paths that are allowed. In order to make this change,
include the maximum-paths paths command under the BGP configuration. Use a
number between 1 and 6 for the paths argument.
That feature is only of use if you are dual-homed to the same AS.
Not totally correct. This feature is only of use if you are dual homed
from a *single router* to the same AS. If you have 2 totally separate
routers in totally different places connected to the same AS (again in 2
different places), then bgp max-paths will have no affect.
-Hank
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
