Hi, According to the feature navigator bgp signalled vpls is on 7200 since 12.2(33)SRC (I haven't tested it yet).
kind regards Pshem On 30 April 2010 21:11, Arie Vayner (avayner) <[email protected]> wrote: > Pshem, > > This is supported on 7600 with ES20/ES+/SIP modules (which are required > for VPLS). > Basically you can xconnect a SVI (either to VPLS or a point to point PW) > and then configure different L3 features on it: > > IP address and IP VRF > ACLs > PBR > Routing protocols, OSPF, RIP, EIGRP,ISIS, BGP > Netflow > QoS Policing for SVI > IP unnumbered > Mcast routing, IGMP, PIM > HSRP/VRRP/GLBP > > This can allow really interesting topologies with HSRP across the MPLS > core etc. > > 7200 in general does not support VPLS. > > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Pshem Kowalczyk > Sent: Friday, April 30, 2010 07:57 > To: [email protected] > Subject: [c-nsp] VPLS with L3VPN access > > Hi, > > I'm trying to get answer to the following question, and so far cisco > website hasn't been very helpful (most probably because I don't know > the cisco term for the feature). > Is it possible on cisco software platforms (like 72xx) to configure a > VPLS and somehow connect it to a L3VPN (on the same PE)? If not on the > software ones - then what devices would support that? > I'm not talking about mass deployment (1 or two AC per PE, handful of > PEs). > > kind regards > Pshem > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
