Chris Gotstein wrote:
Got lots of good suggestions. Tried adding "spanning-tree portfast trunk" and that definitely helps the the AP get the correct IP address from the native VLAN, but as soon as i add in a second AP, i get a spanning-tree loop and one of the ports gets disabled. If i remove the command above, then i get random IP addresses from different VLANs.
Sounds like your AP's are doing WDS with oneanother.... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
