Shake,
Output from show ip ospf interface are as folows
FastEthernet0/0 is up, line protocol is up
Internet Address <<<loopback ip >>>, Area 0
^
This isn't an unnumbered interface by any chance? Or is that just a
typo?
What about MTU on both sides? And what does the other end say?
maybe it would be easier if you could share the config.
Also off-list if you prefer. Like a sh run and a sh int
and sh ip int.
Thanks
Sascha
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
