Hi Shake, 1. Check if you can ping the other router over the link. If no, check ip configuration, etc. 2. Check ospdf network type. Ospf network type must match at both ends, for eg, "ip ospf network point-to-point".
HTH. On Wed, May 12, 2010 at 2:32 AM, shake righa <[email protected]> wrote: > Hi, > > Having a problem whereby ospf adjacencies are not forming. > > a debug on ospf ajacencies is also not showing any thing > > > show ip protocols shows ospf as beign identified and as beign configured. > > have tested by removing any authentication keys but nothing. > Running on a cisco 2621 (MPC860) IOS image c2600-telco-mz.123-15b.bin > > Regards, > Shake > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Nam Nguyen _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
