Matthew, Just to make sure that the relevant optimization has been done... Check that you have BGP PMTU discovery enabled... What is the MSS of the BGP sessions? This can have a major impact on large table convergence...
Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of matthew zeier Sent: Friday, May 28, 2010 06:38 To: [email protected] Subject: [c-nsp] realistic max full bgp peers on a sup720? Running into performance issue with a couple 6503/Sup720-3BXL routers with about 8 or more peers. Each peer's sending a full BGP table. If a couple peers flap, the box typically stays at 100% long enough to either drop more peers or drop OSPF. Cisco's site is vague, only mentioning 1m v4 routes. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
