I did some tests in the lab with IGMP snooping & PIM Sparse-mode with Static RP. That all went fine.
Now I started to configure this on some other routers with also some other configurations that were already on it and when I configured a subinterface with the: ip pim sparse-mode (config)#int GigabitEthernet 3/0.310 (config-subif)#ip pim sparse-mode May 31 15:48:40.218 CET: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.11.130.1 on interface GigabitEthernet3/0.310 At that point all my L2TPv3 tunnels on the other subinterfaces on Gi3 stopped working. When I removed the command ip pim sparse-mode, L2TPv3 came back up again. Is this a bug or am I missing something? Regards, Rens _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
