Nope it is on a different subinterface: interface Loopback0 ip address 172.16.0.1 255.255.255.255 ! interface FastEthernet0/0 description 3560 no ip address duplex auto speed auto ! interface FastEthernet0/0.200 encapsulation dot1Q 200 ip address 10.0.0.1 255.255.255.0 ip pim sparse-mode ip sap listen no snmp trap link-status ! interface FastEthernet0/0.300 encapsulation dot1Q 300 no snmp trap link-status no cdp enable xconnect 172.16.0.2 300 pw-class L2L-PW ! interface FastEthernet0/1 description c1841-BLU ip address 192.168.0.1 255.255.255.0 ip pim sparse-mode ip sap listen duplex auto speed auto
-----Original Message----- From: Marko Milivojevic [mailto:[email protected]] Sent: mercredi 2 juin 2010 1:43 To: Rens Cc: [email protected] Subject: Re: [c-nsp] IPv4 Multicast On Tue, Jun 1, 2010 at 16:14, Rens <[email protected]> wrote: > I have tested this setup with a different 7206VXR running > c7200-adventerprisek9-mz.124-4.T1.bin and I have the same problem. Are you trying to run PIM on the same interface that you have xconnect configured on? Can you please post the relevant configuration? -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert YES! We include 400 hours of REAL rack time with our Blended Learning Solution! Mailto: [email protected] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
