On 6/1/2010 9:00 AM, [email protected] wrote:
Send cisco-nsp mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit https://puck.nether.net/mailman/listinfo/cisco-nsp or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of cisco-nsp digest..." Today's Topics: 1. Re: RES: Load Configuration From Flash (Jeff Fitzwater) ---------------------------------------------------------------------- Message: 1 Date: Tue, 1 Jun 2010 11:04:58 -0400 From: Jeff Fitzwater<[email protected]> To: Mohammad Khalil<[email protected]> Cc: [email protected] Subject: Re: [c-nsp] RES: Load Configuration From Flash Message-ID:<[email protected]> Content-Type: text/plain; charset=iso-8859-1 Does that device support the FORMAT command to redo the NVRAM? Jeff On Jun 1, 2010, at 10:55 , Mohammad Khalil wrote:The issue is that i can start the router and the IOS is loaded successfully when i type anything and save it such as a hostname or interface description and reload the router i find the router back to scratch which means that there is no configuration file saved Subject: Re: [c-nsp] RES: Load Configuration From Flash From: [email protected] Date: Tue, 1 Jun 2010 10:44:20 -0400 CC: [email protected]; [email protected] To: [email protected] I am guessing you are in ROM MON mode and need to get the IOS loaded and then the config. I believe you need to do... boot system flash (any sub device goes here) Jeff On Jun 1, 2010, at 09:45 , Mohammad Khalil wrote: The current IOS is c2600-advipservicesk9-mz.124-18e.bin i tried more than one IOS image and i am not able to find the right image because when i issue the command boot , see the output below Router(config)#boot ? bootstrap Bootstrap image file host Router-specific config file network Network-wide config file system System image file Thanks Subject: RES: [c-nsp] Load Configuration From Flash D! ate: Tue, 1 Jun 2010 10:02:28 -0300 From: [email protected] To: [email protected]; [email protected] It is supposed to work... Did you issue the following command? boot config disk0:startup-config nvbypass Which version are you using? -----Mensagem original----- De: [email protected] [mailto:[email protected]] Em nome de Mohammad Khalil Enviada em: ter?a-feira, 1 de junho de 2010 09:12 Para: [email protected] Assunto: [c-nsp] Load Configuration From Flash hi all i have Cisco 2621XM the NVRAM is corrupted and i want to load the configuration file from flash i looked for the command boot config but i cannot find the appropriate image for the router to do this Thanks
It seems likely that your Config Register setting is set to ignore the NVRAM config. Check your "show version" output and make sure that the config_reg shows something like :
rtr-2>sh ver Cisco IOS Software, 7200 Software ... ... Configuration register is 0x2102 Cheers, Christopher Hunt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
