Dears the configuration register value is 0x3922 which means i just changed the baud rate to 115200 anyway what i am looking for , is there any IOS image that supports the boot config command on the Cisco 2621XM Thanks
> Date: Tue, 1 Jun 2010 11:45:58 -0700 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [c-nsp] RES: Load Configuration From Flash > > > > On 6/1/2010 9:00 AM, [email protected] wrote: > > Send cisco-nsp mailing list submissions to > > [email protected] > > > > To subscribe or unsubscribe via the World Wide Web, visit > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > or, via email, send a message with subject or body 'help' to > > [email protected] > > > > You can reach the person managing the list at > > [email protected] > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of cisco-nsp digest..." > > > > > > Today's Topics: > > > > 1. Re: RES: Load Configuration From Flash (Jeff Fitzwater) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Tue, 1 Jun 2010 11:04:58 -0400 > > From: Jeff Fitzwater<[email protected]> > > To: Mohammad Khalil<[email protected]> > > Cc: [email protected] > > Subject: Re: [c-nsp] RES: Load Configuration From Flash > > Message-ID:<[email protected]> > > Content-Type: text/plain; charset=iso-8859-1 > > > > Does that device support the FORMAT command to redo the NVRAM? > > > > Jeff > > On Jun 1, 2010, at 10:55 , Mohammad Khalil wrote: > > > >> The issue is that i can start the router and the IOS is loaded successfully > >> when i type anything and save it such as a hostname or interface > >> description and reload the router i find the router back to scratch which > >> means that there is no configuration file saved > >> > >> > >> Subject: Re: [c-nsp] RES: Load Configuration From Flash > >> From: [email protected] > >> Date: Tue, 1 Jun 2010 10:44:20 -0400 > >> CC: [email protected]; [email protected] > >> To: [email protected] > >> > >> I am guessing you are in ROM MON mode and need to get the IOS loaded and > >> then the config. > >> > >> I believe you need to do... > >> > >> boot system flash (any sub device goes here) > >> > >> > >> Jeff > >> > >> On Jun 1, 2010, at 09:45 , Mohammad Khalil wrote: > >> > >> > >> The current IOS is c2600-advipservicesk9-mz.124-18e.bin > >> > >> i tried more than one IOS image and i am not able to find the right image > >> because when i issue the command boot , see the output below > >> Router(config)#boot ? > >> bootstrap Bootstrap image file > >> host Router-specific config file > >> network Network-wide config file > >> system System image file > >> > >> Thanks > >> > >> Subject: RES: [c-nsp] Load Configuration From Flash > >> D! ate: Tue, 1 Jun 2010 10:02:28 -0300 > >> From: [email protected] > >> To: [email protected]; [email protected] > >> > >> It is supposed to work... > >> Did you issue the following command? > >> > >> boot config disk0:startup-config nvbypass > >> > >> Which version are you using? > >> > >> > >> > >> -----Mensagem original----- > >> De: [email protected] > >> [mailto:[email protected]] Em nome de Mohammad Khalil > >> Enviada em: ter?a-feira, 1 de junho de 2010 09:12 > >> Para: [email protected] > >> Assunto: [c-nsp] Load Configuration From Flash > >> > >> > >> hi all > >> i have Cisco 2621XM > >> the NVRAM is corrupted and i want to load the configuration file from flash > >> i looked for the command boot config > >> but i cannot find the appropriate image for the router to do this > >> > >> Thanks > > > It seems likely that your Config Register setting is set to ignore the > NVRAM config. Check your "show version" output and make sure that the > config_reg shows something like : > > > rtr-2>sh ver > Cisco IOS Software, 7200 Software ... > ... > Configuration register is 0x2102 > > Cheers, > Christopher Hunt > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _________________________________________________________________ Hotmail: Trusted email with Microsoft’s powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
