On 23/06/10 15:11, Drew Weaver wrote:
router#sh ip arp vlan 643
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.164.46 2 0080.a38c.33d4 ARPA Vlan643
Internet 10.1.164.41 - 000f.f8a6.6d40 ARPA Vlan643
Internet 10.1.164.42 146 0030.48bf.3230 ARPA Vlan643
[r...@dev html]# snmpwalk -v2c -c pub...@643 192.168.0.1 .1.3.6.1.2.1.17.4.3.1.1
This is the dot1dTpFdb i.e. the "sh mac-address"; and by default, its
just for vlan 1.
SNMPv2-SMI::mib-2.17.4.3.1.1.0.15.248.166.109.64 = Hex-STRING: 00 0F F8 A6 6D 40
SNMPv2-SMI::mib-2.17.4.3.1.1.0.128.163.140.51.212 = Hex-STRING: 00 80 A3 8C 33
D4
Does anyone know why I appear to get different data from SNMP than I do from
the switch?
Because you're polling the wrong oid?
ipNetToMedia is the arp table.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
