David, Take a look here: http://docwiki.cisco.com/wiki/Category:NAT http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_nat.htm l
(search for match-in-vrf) Hope this helps. Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Warner Sent: Tuesday, August 03, 2010 09:54 To: [email protected] Subject: [c-nsp] Match-in-VRF Hi, Was hoping someone could advise with regards to what the NAT keywords "match-in-vrf" achieves? We typically use this in production. However, Ive just been labbing NAT config using VRF lite and it doesnt appear to change behaviour and Cisco literature is unclear. With or without it, translations occur in the relevant VRF. ie ip nat inside source static 1.1.1.1 2.2.2.2 vrf VRF-TEST extendable <match-in-vrf> Thanks. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
