On 8-8-2010 13:02, Marco Matarazzo wrote:
Router1
6506 w/VS-S720-10G IOS 12.2(33)SXI2
Customer facing blade: WS-X6148-RJ-45
Hi,
Afair SXI2 has memory leaks, please check if you are affected by them.
Router1##sh mpls l2 vc 71172104 det
Local interface: Fa2/32 up, line protocol up, Ethernet up
Destination address: x.y.z.56, VC ID: 71172104, VC status: up
Output interface: Te5/5, imposed label stack {700}
Preferred path: not configured
Default path: active
Next hop: x.y.z.14
Create time: 03:32:35, last status change time: 03:32:35
Signaling protocol: LDP, peer x.y.z.56:0 up
Targeted Hello: x.y.z.40(LDP Id) -> x.y.z.56
MPLS VC labels: local 969, remote 700
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
If you are unable to rise MTU on fa2/32 (as well as on the other side)
to 1998 or sth higher than 1500, then you cannot pass vlans and keep
1500 MTU inside them.
--
Grzegorz Janoszka
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
