Hi,
Le 08/08/2010 13:33, Gert Doering a écrit :
Hi,
in addition to what Arie said:
On Sun, Aug 08, 2010 at 01:02:46PM +0200, Marco Matarazzo wrote:
Router1#sh run int fa 2/32
Building configuration...
Current configuration : 245 bytes
!
interface FastEthernet2/32
description -VC-71172104--
no ip address
ip verify unicast source reachable-via any allow-default
no ip redirects
no ip proxy-arp
xconnect x.y.z.56 71172104 encapsulation mpls
... just put "mtu 1504" here, to take into account that a full-sized
ethernet frame *plus* dot1q header is just bigger than without... :-)
(Been there, cursed, found the answer)
Sorry Gert but WS-X6148-GE-TX by specification just won't permit this.
mtu config is event not permitted (SXIx).
(config)#interface gigabitEthernet 4/46
(config-if)#mtu 1504
% Invalid input detected at '^' marker.
gert
Cheers,
Fabien
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
