You would need to change the duplex (half or full) to solve this, not the speed.
On Tue, Aug 17, 2010 at 22:03, Jeferson Guardia <[email protected]> wrote: > Guys, > > Anyone knows how to solve this on dynamips? (router with lan switch > connection) - I thought that setting > speed auto would solve it. > > R3# > *Mar 1 00:12:08.323: %SYS-5-CONFIG_I: Configured from console by console > *Mar 1 00:12:10.027: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed > state t > o up > *Mar 1 00:12:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface > FastEthern > et0/0, changed state to up > *Mar 1 00:12:23.527: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on > Fast > Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). > *Mar 1 00:12:24.079: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on > Fast > Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). > *Mar 1 00:12:26.295: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on > Fast > Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). > *Mar 1 00:13:10.571: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on > Fast > Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). > R3# > R3# > *Mar 1 00:13:59.455: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on > Fast > Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). > > > Rgs, > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
