On Fri, 2010-08-20 at 15:39 -0400, P.A wrote: > Yeah I have the same config, but don’t think that incoming packets > will be mapped to the priority queue. I think all the config below is > going to do is set the internal dscp with the policy to be used on the > outgoing queue. From what I understand from the link below all > incoming packets 1st are assigned to an incoming queue before anything > else. So unless the packet already has a COS marking it will not use > the priority queue.
Ah, of course, I failed to actually read what you had wrote about the queueing and focused on the DSCP trust. :-) It seems you were right all along, incoming priority-queue on the 6500 can only work if packets arrive with 1p-bits, or if the card happens to be a WS-X6708-10GE which has the "priority-queue dscp-map ..." command. (The 6708 _is_ a sweet card regarding QoS, at least among LAN cards.) -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
