We just didn't see a need to support 10 and 100 individually. There is no standard regarding this as far as I know.
Jim -----Original Message----- From: Peter Rathlev [mailto:[email protected]] Sent: Friday, August 20, 2010 4:36 PM To: Jim Getker (getker) Cc: [email protected] Subject: Re: [c-nsp] The myths of autonegotiate vs forced Importance: High On Fri, 2010-08-20 at 14:58 -0500, Jim Getker (getker) wrote: > The 6K gigabit copper ports support speed auto 10 100. Hm... it actually does support "speed auto 10 100", but "speed auto 100" returns an error (WS-X6748-GE-TX): Switch(config)#int gi1/1 Switch(config-if)#speed auto 100 Speed autonegotiation subset is not supported on this interface Switch(config-if)#speed auto 10 100 Switch(config-if)# This confuses a novice like me. Maybe the output could be adjusted a little? :-) (And why support "10/100 only" and not "100 only" anyway? Standards compliance of some kind?) -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
