Hi, I have never seen anything about 'HRPC' before, but some googling suggests that its some Remote Procedure Call component they are using. RPC basically provides access for calling software functions a device, from another device. It might be what is being used in the stack for interswitch software comms, the interesting thing is x_setup. To me that suggests each device in the stack is providing a function for a 'factory reset'. I have no idea now a packet/RPC call from the real world would get messed up with that (if something came from outside the device), the only obvious things are using the CLI or web interface to perform a factory reset. Did you reset any switches at all around the same time? Also, the logs are the wrong way around?
Not very helpful I know, but atleast it might explain what the error messages are actually saying... H On 25 August 2010 08:56, PARATTE Florent (G) <[email protected]>wrote: > Hello, > > yesterday, a stack of three WS-C3750G-24TS-S IPBASE 12.2(50)SE3 reloaded > after having erased its configuration... i tried to find the issue but i > haven't found anything. I just have syslog messages as following: > > > Notice 2010-08-24 14:36:58 4606: 004527: Aug 24 14:36:57.301: > %SYS-5-RELOAD: Reload requested by HRPC x_setup request handler. Reload > reason: Reason unspecified > > Info 2010-08-24 14:36:57 4605: 004526: Aug 24 14:36:56.295: > %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configuration is reset and the system > will now reboot > > > Do you have an idea of what happened? > > Thank you in advance. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
