Has to be configured as trusted, which it isn't. dual-active detection pagp trust channel-group 114
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configu ration/guide/vss.html#wp1063913 David -- http://dcp.dcptech.com > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Church, Charles > Sent: Thursday, August 26, 2010 10:41 PM > To: nsp-cisco > Subject: [c-nsp] Enhanced PAgP for VSS > > Anyone, > > I've got a 6500 VSS pair running 12.2(33)SXI4, with an attached > 4500 > running 12.2(54)SG. From what I can tell, they should both support > enhanced > PAgP. However, they don't seem to realize it, this is what they both > tell > me: > > SCUCER02-05CRT01#sh pag 114 du (this is the 6500 VSS pair) > PAgP dual-active detection enabled: Yes > PAgP dual-active version: 1.1 > > Channel group 114 dual-active detect capability w/nbrs > Dual-Active trusted group: No > Dual-Active Partner Partner Partner > Port Detect Capable Name Port Version > Te1/3/5 No SCUHQB02308UAS01.hq. Te5/1 N/A > Te2/3/5 No SCUHQB02308UAS01.hq. Te6/1 N/A > SCUCER02-05CRT01# > > SCUHQB02308UAS01#sh pag 10 du (this is the 4510) > PAgP dual-active detection enabled: Yes > PAgP dual-active version: 1.1 > > Channel group 10 > Dual-Active Partner Partner Partner > Port Detect Capable Name Port Version > Te5/1 No SCUCER02-05CRT01 Te1/3/5 N/A > Te6/1 No SCUCER02-05CRT01 Te2/3/5 N/A > SCUHQB02308UAS01# > > It would appear that they both support it, there is a PAgP channel up > (all 4 > links are desirable). From what I've read, there isn't any > configuration > needed to enable this. Any idea what might be wrong? > > Thanks, > > Chuck _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
