Makes sense - thanks again everyone. Thanks,
-Jeff -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Phil Mayers Sent: Tuesday, September 21, 2010 11:16 AM To: [email protected] Subject: Re: [c-nsp] Embeded Packet Capture for DHCP Troubleshooting On 21/09/10 16:23, Jeff Wojciechowski wrote: > boot up (so before the client has an ip from dhcp - isn't the dhcp > transaction all arp?) No. It's UDP packets on ports 67 and 68. It uses source/dest addresses of 0.0.0.0 and 255.255.255.255, but it's still plain IP packets, so embedded packet capture should work. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
