Yes - portfast on on all interface - makes sense that it could confuse DHCP.
Thanks, -Jeff -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Raymond Burkholder Sent: Tuesday, September 21, 2010 10:41 AM To: [email protected] Subject: Re: [c-nsp] Embeded Packet Capture for DHCP Troubleshooting > > 2801 is doing dhcp - and I wanted to get a packet capture to see why 2 thin > clients won't get dhcp leases successfully from the 2801 upon boot up > (so before the client has an ip from dhcp - isn't the dhcp transaction > all arp?) > Check your switch. Do you have portfast turned on? I've seen port negotiation get in the way of dhcp negotiation. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
