0.0.0.0/0 = matches the default route 0.0.0.0/0 le 32 = matches all prefixes
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfbgp1.html Chris On Thu, Sep 23, 2010 at 1:03 PM, Deric Kwok <[email protected]>wrote: > Thank you > > Can I know what is different between 0.0.0.0/0 le 32 and 0.0.0.0/0 ? > > Thank you again > > > > On Thu, Sep 23, 2010 at 12:26 PM, Christopher Gatlin > <[email protected]> wrote: > > Try this: > > > > ip prefix-list traffic-in seq 100 permit 0.0.0.0/0 le 32 > > > > > > Chris > > > > > > On Thu, Sep 23, 2010 at 11:15 AM, Deric Kwok <[email protected]> > > wrote: > >> > >> Hi all > >> > >> What is the "ip prefix-list traffic-in seq 100 permit any" > >> > >> I can't use it > >> > >> Thank you > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
