Very nice. Let me try. Two questions:
1/ Before adding the correct one "ip prefix-list traffic-in seq 100 permit 0/0 le 32", Do I remove the previous prefix list "ip prefix-list traffic-in seq 100 permit" or unbind the ip prefix-list I try unbind the previous list in bgp but not successful. Why? router bgp AS no neighbor x.x.x.x prefix-list traffic-in in I sh run config and it is still there neighbor x.x.x.x prefix-list traffic-in in 2/ How do I know ssh enabled in my IOS router? Thank you again On Thu, Sep 23, 2010 at 2:15 PM, Gert Doering <[email protected]> wrote: > Hi, > > On Thu, Sep 23, 2010 at 02:03:13PM -0400, Deric Kwok wrote: >> Can I know what is different between 0.0.0.0/0 le 32 > > This will permit anything ("inside the /0, up to a /32"). > >> and 0.0.0.0/0 ? > > This will permit exactly the default route "network 0.0.0.0, mask /0". > > gert > -- > USENET is *not* the non-clickable part of WWW! > //www.muc.de/~gert/ > Gert Doering - Munich, Germany [email protected] > fax: +49-89-35655025 [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
