You would want this guy then: http://www.adtran.com/web/page/portal/Adtran/product/4200821E11/11
We use them extensively and have been happy. It looks like they also have one with two WIC-equivalent slots instead of one: http://www.adtran.com/web/page/portal/Adtran/product/4200824G11/11 Dave -- Dave Weis 515-224-9229 [email protected] http://www.internetsolver.com/ Please check out our Complete Support Service http://www.internetsolver.com/completesupport/ > -----Original Message----- > From: Jason Berenson [mailto:[email protected]] > Sent: Tuesday, October 12, 2010 8:45 AM > To: Dave Weis > Cc: [email protected] > Subject: Re: [c-nsp] Small office sanity check > > Looks great, but it doesn't list LLDP or PoE as an option. > > -Jason > > On 10/12/10 9:29 AM, Dave Weis wrote: > > I realize it's not a Cisco device but an Adtran 3448 would > fit exactly what you are trying to do. > > > > http://www.adtran.com/web/page/portal/Adtran/product/4200821E2 > > > > > > > >> -----Original Message----- > >> From: [email protected] > >> [mailto:[email protected]] On Behalf Of Jason > >> Berenson > >> Sent: Monday, October 11, 2010 9:43 PM > >> To: [email protected] > >> Subject: [c-nsp] Small office sanity check > >> > >> Greetings, > >> > >> I'm trying to come up with a small office router/switch > >> configuration. > >> This would be an office with a DSL or T1 with 4-8 IP > phones and the > >> same in computers. Requirements are as follows: > >> > >> - Covad split PVC voice/data for QoS > >> - LLDP to dynamically assign VLANs to phones and keep computers in > >> VLAN 1 > >> - DHCP with options capability to send config server > information to > >> phones > >> - PoE that can do between 7W and 15W per port > >> - VRF to split voice/data routing > >> - As cheap as possible > >> > >> Here's what I've come up with so far: > >> > >> - Cisco 1721 with ADSL or T1 module > >> - Cisco 300 seris SRW208P-K9-NA > >> > >> Relevant portion of the 1721 config: > >> > >> ip dhcp pool voice > >> vrf voice > >> network 192.168.10.0 255.255.255.0 > >> dns-server 1.1.1.1 2.2.2.2 > >> netbios-node-type h-node > >> default-router 192.168.10.1 > >> option 66 ascii "config-server" > >> lease 30 > >> ! > >> ip vrf voice > >> rd 2:1 > >> route-target export 2:1 > >> route-target import 2:1 > >> > >> interface ATM0 > >> no ip address > >> no atm ilmi-keepalive > >> dsl operating-mode auto > >> ! > >> interface ATM0.1 point-to-point > >> ip address 10.3.5.202 255.255.255.252 > >> pvc 0/35 > >> description DATA > >> encapsulation aal5mux ip > >> ! > >> ! > >> interface ATM0.2 point-to-point > >> ip vrf forwarding voice > >> ip address x.x.x.x 255.255.255.252 > >> pvc 0/36 > >> description VOICE > >> encapsulation aal5mux ip > >> ! > >> ! > >> interface FastEthernet0 > >> no ip address > >> speed 100 > >> full-duplex > >> no cdp enable > >> ! > >> interface FastEthernet0.1 > >> encapsulation dot1Q 1 native > >> ip address y.y.y.y 255.255.255.252 > >> no cdp enable > >> ! > >> interface FastEthernet0.120 > >> encapsulation dot1Q 120 > >> ip vrf forwarding voice > >> ip address 192.168.10.1 255.255.255.0 > >> no cdp enable > >> ! > >> ip nat inside source list 101 interface ATM0.2 vrf voice > overload ip > >> classless ip route 0.0.0.0 0.0.0.0 10.3.5.201 name data ip > route vrf > >> voice 0.0.0.0 0.0.0.0 y.y.y.z name voice no ip http server ip http > >> authentication local ! > >> ! > >> access-list 101 permit ip 192.168.10.0 0.0.0.255 any > >> > >> This should allow for a routed public net on VLAN 1 for their > >> firewall and a NAT'd network on VLAN 120 for the phones. Any > >> pointers, comments, recommendations are welcome. > >> > >> Thanks, > >> Jason > >> > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
