Hi,
I have established an EoMPLS circuit on ME3750 switches as below. everything seems to be working fine as my virtual circuit is UP but my problem is that I cant ping IP address CE02 from CE01 PC01---CE01---PE01---PE02---CE02---PC02 I have applied the following configuration on PE01 & PE02 ES ports interface loopback 0 ip address 1.1.1.1 255.255.255.255 ! interface GigabitEthernet1/1/1 description to PE02 ip address 10.0.0.1 255.255.255.252 mpls ip ! interface GigabitEthernet1/1/2 description to CE01 switchport mode access switchport access vlan 100 ! vlan 100 ! interface vlan 100 xconnect 2.2.2.2 100 encapsulation mpls where could me my problem! Regards, Manaf Al Oqlah _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
