I was not aware that there was an IPSEC blade for the 9K like there is
for the 7600. If there is not then obviously your would need to put
something like an ASA in-line but then it should work fine.
-Ben
On Oct 27, 2010, at 6:36 PM, Rubens Kuhl wrote:
After reading ASR-9000 specs no CCO, seems to me that is not possible
to do Layer 2 transport with IPSEC with it, either using L2TPv3 (like
ASR-1000) or VPLS (like 7600). Is that really true, or am I missing
something ?
Rubens
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
