Jarod, This is exactly what I was looking for.
Thanks! //LeBlanc -----Original Message----- From: Mohlmaster, Jarod [mailto:[email protected]] Sent: Thursday, November 11, 2010 11:50 AM To: Leblanc, Jason; [email protected] Subject: RE: [c-nsp] 4510 Hardware Question According to http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product _data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html It looks like 8-10 do not support E series line cards with a Sup6-E. So scratch slots 8-10 as well as your supervisor slots in your configuration - looks like 5 usable slots with this linecard. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Leblanc, Jason Sent: Thursday, November 11, 2010 12:56 PM To: '[email protected]' Subject: [c-nsp] 4510 Hardware Question I have to configure a 4510R-E w/ dual 6E Sup's for a customer that already has one and is looking for redundancy. I would like to fully populate it with the WS-X4648-RJ45V-E blades but the Cisco configurator says that's not possible. The WS-X4548-GB-RJ45V have an 8:1 oversubscription which I would like to avoid. Questions: How many WS-X4648-RJ45V-E blades can I get working in the chassis? Does it matter which slots (outside of the Supervisor slots)? Thanks, //LeBlanc ________________________________ This communication is the property of Qwest and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ This communication is the property of Qwest and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
