Hello all I am examining the prospect of enabling urfp in a cisco 7609 / RSP 720 platform, for subscriber facing interfaces.
My needs are covered by plain strict urpf (no acls, or multipath support is needed). According to documentation traffic failing urpf is supposed to be handled in hardware. In my setup the mls rate-limiter for unicast ip rpf-failure is disabled (needed the rate limiter resources for other traffic types) Is the "mls unicast ip rpf-failure" rate limiter needed in the case of strict urfp? or its usage is limited to packets failing uRFP check when ACL / multipath is needed? Thnx _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
