Hi, > I'm working a school project with a truckload of original Sup720s in > 6500s. Given the funding arrangements, replacing these units is, shall > we say, unlikely. Should we find issues where MPLS would be beneficial, > does anyone have experience with the global command 'mls mpls enable'? > If so, could you please share your experiences?
there are many times when it seem you can run a command....and only find that you cant when you run it. if you dont have a test-bench/network available, then all i can suggest is that you wait until some suitable at risk time - or out of hours then issue a 'reload in 3 minutes' command, try running the above command....and see what you get. if it all goes wrong, the router should reload in 3 minutes to get you back to where you were....otherwise- you'll know the answer. and yes, as per other messages on the list..you can see what you should be able to run on the hardware/featureset navigator alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
