I was having problems upgrading memory in a ISR G2 2951 from two 512M DIMMs to one 2GB DIMM. Neither of the DIMM I had worked so I started to think I may need to upgrade ROMMON/boot loader. But for the life of me, I could not find any release notes on cisco.com for it anywhere. There is newer release of boot loader than what's on the router but could not find any release notes. Anyone know where I could find it or if a new boot loader is required for 2GB DIMM?
With the new RAM, the router keeps repeating this Check stop condition detected, resetting the system System Bootstrap, Version 15.0(1r)M1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2009 by cisco Systems, Inc. It's possible both DIMMs were bad but it seems unlikely. It's also possible the vendor sent me the wrong type. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
